← Neuric Support

Set up email forwarding

Connect your support address, choose how Neuric handles replies, and review filtered email.

Before you start

You need access to the support mailbox and, for Google Workspace or Microsoft 365, an administrator who can configure forwarding. Neuric gives each inbox its own receiving address; your customers keep using your existing support address.

Email handling starts disabled: Neuric receives email for review but does not run the agent or send replies. Filtering starts in observation mode, recording decisions without moving email out of the inbox. Connection, agent behavior and filtering are separate settings.

1. Add your support inbox

  1. Open Settings → Inboxes & email → Email addresses and choose Add address. Enter the address customers already use and a display name. Neuric looks up the domain and tells you which provider's steps come next.
  2. The address opens with its setup steps: the Neuric address to forward to, the steps for your provider with a link into its admin console, the check, and the optional DNS records for sending from your own address. You can return to it with Finish setup.
  3. Keep Receive email enabled while setting up and testing. Configure each support address separately.

2. Forward from Google Workspace

  1. As a Google Workspace administrator, open Google Admin → Apps → Google Workspace → Gmail → Routing and select the top-level organisational unit.
  2. Under Email forwarding using recipient address map, add a rule mapping your support address to the receiving address copied from Neuric. If a rule already exists for that address, update it instead of creating an overlapping rule.
  3. Choose All incoming messages if both internal and external requests should reach Neuric. Keep Also deliver to original destination on so your team keeps its Gmail copy.
  4. Save the rule. Changes can take up to 24 hours, though they usually apply within minutes. Then run the check in Desk.
Open Google Admin routing ↗Google Workspace forwarding instructions ↗

2. Forward from Microsoft 365

  1. As an Exchange administrator, open the Exchange admin center → Recipients → Mailboxes and select the support mailbox.
  2. Under Manage mail flow settings → Email forwarding, enable forwarding to an external address and paste the receiving address copied from Neuric. Keep Deliver message to both forwarding address and mailbox on.
  3. If Microsoft reports that your organisation does not allow external forwarding, an administrator first turns on Automatic forwarding in the outbound spam policy. New tenants block it by default.
  4. If you set it up as an Outlook rule instead, choose Redirect rather than Forward. A forward replaces the customer's address with yours, so Neuric can no longer tell who wrote. Then run the check in Desk.
Open Exchange admin center ↗Microsoft 365 forwarding instructions ↗Microsoft external forwarding policy ↗

2. Forward from a Gmail address

  1. In Gmail, open Settings → See all settings → Forwarding and POP/IMAP and choose Add a forwarding address. Paste the receiving address copied from Neuric.
  2. Google emails a confirmation to that address. It shows up in Desk on the support address itself, with an Open confirmation button. Open it and confirm.
  3. Back in Gmail, choose Forward a copy of incoming mail to the Neuric address and keep Gmail's copy in the Inbox. Save. Gmail forwards from that moment on.
Open Gmail forwarding settings ↗

Or: an address Neuric receives directly

Instead of forwarding, you can give Neuric an address of its own on a domain you point at it. Choose Neuric receives it directly when adding the address, enter the address and its domain, and Neuric registers the domain with the email provider and shows one set of DNS records: an MX record that brings mail in, and the DKIM and return-path records that let replies go out as the address itself. Add them once at your domain host; the address shows Waiting for DNS until they resolve and verifies by itself, at the latest when the first email arrives.

Use a dedicated subdomain, such as help.yourdomain.com, or a domain with no mail on it. An MX record decides where all mail for that name goes, so pointing your main domain at Neuric would move every mailbox on it away from Google Workspace or Microsoft 365. Desk looks the domain up and warns when it already receives mail elsewhere.

Customers write to the new address directly, so there is no copy in another inbox and nothing to forward. Replies come from the address itself as soon as the sending records resolve; until then they come from a Neuric address with your address as reply-to.

Using another email provider

Configure automatic forwarding for the support mailbox to Neuric's receiving address, preserving the original sender and a copy in the original inbox. Choose redirect where it is offered: a redirect keeps the original sender, a forward replaces it with you.

If your provider sends a confirmation email to the receiving address, it shows up in Desk on the support address with a button to open it. Only follow a confirmation link for a forwarding request you initiated. The provider's confirmation and Neuric's check are separate.

3. Check that email comes back

  1. After forwarding is saved, open the address in Desk and choose I've set up forwarding, check now. Neuric emails your support address and waits for your provider to forward it back.
  2. The address shows Checking until the email arrives, then Verified. This updates on its own, usually within a minute; no refresh is needed. Forwarded mail that reaches Neuric before you press the button starts the check by itself.
  3. If nothing comes back within 30 minutes, the check is marked as failed. Confirm the original inbox received the email, compare the forwarding destination with the exact Neuric address, check the provider's external forwarding policy, and choose Check again.
  4. Send a realistic support request from a separate address to your original support address. Confirm that it stays in the original inbox and appears in Neuric. The check email itself never becomes a customer conversation.

4. Review email filtering

Open Filtering → Recent decisions to inspect what the gate would filter. It only excludes clear spam, promotions and routine notifications. Incomplete requests, thanks, human messages delivered by forms and important operational notices are let through.

Start with Observe for the address. After reviewing real incoming email, choose Filter to keep unwanted messages outside the inbox. Filtered email is retained for recovery; an unavailable filter lets mail through.

5. Recover and review messages

Open Filtering → Filtered, select an email and choose Move to inbox to release it with its original attachments and threading. Needs attention contains forwarding setup messages and processing failures.

Recent decisions lets you mark the intended outcome: Let through or Filter. This saves feedback; it does not change the model automatically or move the email.

6. Go live

  1. Open Agent and enable email handling when you are ready. Teammates can then reply from Desk.
  2. Choose reply behavior per address: Team handles replies, Review drafts before sending, or Send replies automatically. Start with draft review. Neuric owns request understanding, missing details and procedures, and can decide no reply is needed.
  3. Each email shows as a card: who sent it and to whom on top, the new text, and the quoted history folded behind three dots. Click the header for reply-to, cc, date and subject. Attachments the email carried but Neuric could not import are listed on the card. Replies are written in an email composer that shows the sender, the recipients (edit To and Cc per reply), your signature and the history that will be appended, with Send and close for one-shot answers.
  4. Until you authenticate your domain, replies are sent from a Neuric address with your support address as Reply-To, so the customer's answer reaches both your inbox and Neuric and stays in the same thread.

7. Send from your own address

Customers then see support@yourdomain.com in the From line, exactly as if a teammate had replied from the mailbox, and their answers thread in your inbox without a Reply-To. Email providers only allow this when the domain owner delegates signing to the sender, which means adding DNS records. No provider can skip that step.

  1. In the address's setup steps, or under Email addresses → Send from your own address, choose Get DNS records to see the records supplied by the email provider.
  2. Ask whoever manages your DNS to add the records exactly as shown, including their types, hosts and values. Follow the instructions from your DNS provider.
  3. Choose Check records. When every record resolves the domain becomes Verified. Propagation can take up to 48 hours; the page keeps checking on its own while it waits.
  4. Open the address and set Send replies from to your verified address. If DNS authentication later fails, replies fall back to the Neuric address.

Removing the domain in Desk returns every inbox on it to the Neuric address first, so nothing stops sending. Remove the DNS records afterwards if you no longer want them.

If something is missing

  1. No check email in the original inbox: check the address entered in Desk, spam and your provider's delivery logs.
  2. Original inbox received it but Desk still shows Checking: compare the exact forwarding destination, confirm the inbox is active and check whether external forwarding is blocked. Allow time for provider changes, then choose Check again.
  3. Verified but a message is missing: check Filtering → Filtered and Needs attention, then test with a realistic customer question.
  4. Replies are disabled: open Agent and check Enable email handling and the reply behavior for the address. While handling is disabled, reply from your original mailbox.
  5. Still stuck: ask Neuric for help and state your email provider, the step you reached and the status shown in Desk. Never share passwords, API keys or full customer emails just to explain a setup problem.

Last reviewed 2026-11-03